A. All OpenIFS users will be given full access to this website. Access to other ECMWF systems may not always be required and your needs should be discussed with the OpenIFS team or User Support. Member state users should always apply for an account via their national Met Service representative. A contact list can be found here: http://www.ecmwf.int/services/computing/help/reps/index.html. If you want to contact ECMWF prior to applying to your national Met Service then please see this list for the appropriate ECMWF User Support contact to ask: http://www.ecmwf.int/services/computing/help/User_Support_Contact_Points.html

If you are a user from a non ECMWF member state you should contact openifs-support@ecmwf.int to discuss your needs.

A. This is usually caused by a firewall at the user site blocking ftp connections. There are two types of ftp connections, so-called 'active' and 'passive'. The essential difference is that 'active' mode tries to open multiple connections to the ECMWF ftp server. This behaviour is undesirable for sites running firewalls and is usually blocked. Although passive mode ftp is usually the default, if you see this error try using the '-p' option 'ftp -p' or, if it's available the command 'pftp' which invokes a passive mode only ftp.

A. This is because the FCM configuration files assume the use of a 'compiler wrapper' which is typically provided by MPI (e.g. OpenMPI or MPICH) installations. Make sure you have a flavour of MPI installed and you have the 'bin' directory included on your PATH environment variable. For example, on linux use 'apt-get install libopenmpi-dev' to get OpenMPI. HPC machines may require you to use a 'module' command e.g 'module load openmpi': check your local help information.

A. FCM has found an include statement: "#include cpg1c.intfb.h" in the source code but can't find the source file cpg1c.F90. Make sure the file exists or FCM is configured to look at all the sources.

A. FCM queries the TMPDIR environment variable. If set it uses that location, otherwise it defaults to /tmp. On HPC systems, /tmp may not be the best choice if it is in memory.

A. The $HERE variable is a special variable that FCM interprets as the directory in which the configuration file resides. Unlike most of the other variables in the FCM configuration files, $HERE cannot be overridden by an environment variable of the same name.

A. For more information on how to correctly set your environment for compiling OpenIFS, see: HowTos: How to set your user environment.

It varies depending on your MPI implementation and your local environment. As an example, for OpenMPI, set the environment variables:
export OMPI_FC=pgf90
export OMPI_CC=pgcc
to use the Portland compilers instead of the default GNU (gfortran) compilers. Check the 'man page' of the mpif90 command to see what other options are possible. Some implementations allow you to use an option -fc to set the underlying compilers.

For Intel installations there are several ways in which the compiler can be set. Normally, the mpif90 command will invoke the gfortran compiler, the mpiifort will invoke the ifort compiler and the mpifc command can be used with a specified compiler on the command line. However, this behaviour can be changed by setting environment variables which these wrapper scripts will read. For more details consult the Intel compiler documentation.

Some HPC centres provide the 'module' command for loading and unloading particular compiler suites. Consult your local documentation for more details.

A. This can arise with the Intel compiler. The MKL library is Intel's version of the LAPACK and BLAS libraries which should be supplied with the compiler. The .so file extension means this is a shared library found at runtime. In order to find this library, the environment variable LD_LIBRARY_PATH must be set correctly. You will need to find the location of this library and add the directory to the LD_LIBRARY_PATH. Normally this is done for you by a small script supplied with the Intel compiler script. Please check your support information.

A. These routines come from the LAPACK and BLAS libraries. You may have one or other of these libraries missing from your .cfg config (or OIFS_LAPACK_LIB environment variable). Alternately you have specific both libraries but the compiler can't find them; check the pathnames to the libraries specified on the compile link carefully.

A. These are references to the JASPER library and arise because the grib_api library referred to in the OpenIFS build configuration was compiled with the Jasper library, but the LD_LIBRARY_PATH environment variable does not list the directory containing the library so the compiler can't find it. Either amend the LD_LIBRARY_PATH or add the -ljasper library to your compilation options.

A. It's recommended that the same compiler suite is used to compile OpenIFS, your MPI installation and LAPACK. This may not always be practical but it's strongly recommended as some compilers use a different default size of LOGICAL variables which can cause crashes due to memory alignment problems in subroutine calls.

A. The log output from compiling OpenIFS can be found in the 'make' directory, then in the build directories 'opt', 'noopt' etc. The FCM software keeps the log in a hidden directory called '.fcm-make'. So if OIFS_BUILD=opt was set, the logfile for this compilation would be : make/opt/.fcm-make/log.

A. The 'T' refers to the spectral truncation of the model and the number following is the highest retained wavenumber. A spectral method, based on spherical harmonic expansion is used in the model, for example to compute some horizontal derivatives. The 'T' means the model uses a 'triangular' truncation in spectral space to decide the retained spherical harmonics. The number following the 'T' is the highest retained wave number. For more information on the spectral truncation and resolution of the model and the model grid, the IFS documentation is recommended reading.

T159 is approximately 125km resolution, T255 - 80km, T511 - 40km, T799 - 25km, T1279 - 16km.

A. This depends on the grid used. For medium and high resolutions, the model uses a 'reduced Gaussian grid' with reduced numbers of gridpoints along a latitude circle towards the poles. Full quadratic and linear grids are also possible. This table shows the correspondence between spectral resolution and lat/lon resolution. The grid definitions can also be found here: reduced gaussian grid definitions.

A. The OpenIFS model is based on the main IFS code though is only capable of forecasts. The first OpenIFS version was based on cycle 38 release 1 (known as CY38R1). More information is found on the page comparing OpenIFS .v. IFS.

Information on scientific & technical changes between cycle releases is available on the main ECMWF website.

A. The model writes its output in GRIB format using WMO FM-92 GRIB edition 1 and edition 2 messages. ECMWF provides the GRIB_API software for handling and manipulating grib data using either command line tools and a programming library for C, Fortran and Python.

For plotting GRIB data, ECMWF provides the MetView software, which is freely available under the Apache license.

Note that the OpenIFS model outputs a mix of GRIB edition 1 & 2 messages in a single file. Unlike MetView, not all GRIB software available on the Internet can read such files and extra steps may be necessary to separate the messages before use if you want to use 3rd party software.

A. The model can be run in 'reference' mode where it computes statistical numerical norms and compares against values calculated at ECMWF. Please see 'Testing the Installation' for more details.

A. The timestep depends on the horizontal and vertical resolution, the type of grid (full or reduced Gaussian), whether Eulerian or semi-Lagrangian (SL) transport is used and whether the 2 or 3 time-level SL scheme is used. The recommended default is the 2 time-level SL scheme. For this configuration suggested timesteps are: T21 - T159 : 60mins, T213 -T319 : 20mins, T511 and above : 10mins. If the 2 time-level scheme is not used, these timesteps should be halved. If Eulerian, not SL transport is used, these timesteps should be a quarter. For more details, see the code in the routine sudyn.F90 which has approximate values for the timestep (n.b. the NAMDYN namelist variable TSTEP is in units of secs).

Note the model will calculate the optimum timestep for its particular configuration. This value is written to the NODE_001.01 output file. Look for the line:
PTSTEP_OPT (optimal timestep computed in SUTSTEP) 0.36000000E+04
to see the recommended value in seconds.

A. The file 'MCICA' is a climatological input file the model needs. The model expects to read the climatological files from a sub-directory called 'ifsdata' in the directory containing the executable. Normally this is a link to where you installed the ifs data files. See Downloading OpenIFS for more details on how to download and install the data files.

A. This usually indicates an error in the GRIB file or GRIB_API configuration rather than the model. See the GRIB FAQ on this page, or email openifs-support@ecmwf.int and include the model output file (NODE_001.01) and the job log.

A. This could be for a number of reasons. However, a common one is that when compiled optimized the model requires more memory.  With the optimized settings OpenMP is enabled. This causes the model to require more what's known as 'stack memory'. To increase your stack memory to the maximum allowed on your system, use the command 'ulimit -s unlimited'. If that does not solve your problem, email openifs-support@ecmwf.int.

A. This normally means that the OpenMP stacksize is not large enough. The default per process stack size limit is too low and needs to be increased. Check the value of the OMP_STACKSIZE environment variable.

A. This could be for a number of reasons. One possibility is that the model is configured as if running at ECMWF where it writes file to a special database. Check that the NODE_001.01 output file and make sure that in namelist NAMCT0, the variable LFDBOP is .FALSE. and in namelist NAMPAR1, the variable NOUTTYPE=1. If this is the ok, then please see our HowTo on changing the model output or contact openifs-support@ecmwf.int.

A. The 'boot.def' file is the GRIB definitions file. The location of the boot.def file is hardcoded into the GRIB_API library when it is compiled. Make sure that the directory where GRIB_API was installed has not moved. If it has, this hardcoded location will be wrong. You can override this location by using the environment variable: GRIB_DEFINITION_PATH and set this to the directory containing the boot.def file. e.g.
export GRIB_DEFINITION_PATH=/usr/local/apps/grib_api/1.9.18/share/definitions

This error can arise when grib_api is compiled in HPC environments where it's compiled on the front-end but the batch system has different mount points for the frontend directories causing the path to the grib_api installation to be different.

A. This usually indicates an error in the GRIB file rather than the model. Please email openifs-support@ecmwf.int and include the model output file (NODE_001.01) and the job log.

A. The environment variables for GRIB_API are described on the GRIB_API software support page.

A. If grib_api installed correctly, the command grib_info will print out the location of the sample files and definitions. If you get 'grib_info not found' make sure you have added the grib_api installation bin directory to your PATH environment variable.

A. Please see HowTo convert convert model output to netCDF.

A. If you see this type of error:

% grib_ls ICMGGepc8+000004
ICMGGepc8+000004
edition  centre typeOfLevel level  dataDate  stepRange dataType  shortName packingType

GRIB_API ERROR   :  unable to represent the step in h
1       ecmf    surface     0      20041015 Decoding invalid stepRange

it is most likely because the model step isn't expressible as an integer number of hours (for example if the model output is every timestep with a timestep less than 1hr). Change the units to either minutes or seconds:

 grib_ls -s stepUnits=m ICMGGepc8+000004
 grib_ls -s stepUnits=s ICMGGepc8+000004

A. This is a known issue with compiling on Mac OS X. See this page on the GRIB_API Installation FAQ for the workaround.

A. On Mac OS X, the MKL library is a dynamic (shared) library which is loaded at runtime and not when the model is compiled. To ensure the library is found you need to add the directory containing the library to your dynamic library path environment variable (DYLD_LIBRARY_PATH). The Intel compiler supplies a script that correctly sets the compile environment for you which should be run. This is normally found in the Intel compiler install directory: /opt/intel/Compiler/11.0/054/Frameworks/mkl/tools/environment/mklvars.sh.