New and changed parameters
New parameters
The table contains the list of parameters expected to be available with the new cycle implementation. They will be available as part of the test data. With implementation the parameters will be available in MARS and dissemination.
All the new parameters will be available from the Medium range ensemble model.
Param ID | Short name | Name | Units | Component & type | GRIB edition | Lev. type | ecCharts | Status |
---|---|---|---|---|---|---|---|---|
2r | 2 metre relative humidity | % | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet |
utci |
Universal thermal climate index | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet |
wcf
mrt | Mean radiant temperature |
K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet |
heatx | Heat index | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet | |
wcf | Wind chill factor | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet | |
aptmp | Apparent temperature | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet | |
hmdx | Humidex | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet | |
nefft | Normal effective temperature | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet | |
gt | Globe temperature | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet | |
wbgt | Wet bulb globe temperature | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet | |
wbpt | Wet-bulb potential temperature | K | ENS / CTRL (ex HRES) | 2 | sfc | TBD | Not produced yet | |
tdcmax | Time domain maximum individual crest height | m | ENS-WAM | 2 | sfc | TBD | Not produced yet | |
tdhmax | Time domain maximum individual wave height | m | ENS-WAM | 2 | sfc | TBD | Not produced yet | |
stcmax | Space time maximum individual crest height | m | ENS-WAM | 2 | sfc | TBD | Not produced yet | |
sthmax | Space time maximum individual wave height | m | ENS-WAM | 2 | sfc | TBD | Not produced yet |
Changes to existing parameters
Simulated Satellite Data
Ident / Instrument | Parameter | Current channels | Upgraded channels |
---|---|---|---|
METEOSAT 10 (57) | 5/6/9 | 5/6/9 | |
Cloudy reflectance*** | 1/2 | 1/3 | |
METEOSAT 12 (71) | Cloudy brightness temperature | - | 10/11/14 |
Cloudy reflectance | - | 1/2/3/4/7 |
* Spinning Enhanced Visible and Infrared Imager (SEVIRI)
** Flexible Combined Imager (FCI)
*** This parameter was added in between cycles IFS 48r1 and 49r1
For more details about the changes to the Simulated Satellite, including how to download the test data, data see Simulated Satellite Data update.
Other changes
- Probabilistic clear-air turbulence products will be extended to include contributions from non-orographic gravity-wave dissipation outside of convection areas.
- Sea surface temperature (SST) parameter values over land will change. The values over land are currently set to an unphysical, but spatially and temporally constant 273.16K. SST values over land will be set to that of the lake model's mixed layer temperature. The underlying field is much smoother, which helps give much more realistic values around coastlines when interpolating this field.
Discontinued parameters
With 49r1, CAPE (parameter 59), will be discontinued and only the improved MUCAPE (parameter 228235) will be produced.
CIN (parameter 228001) parameter will be replaced by MUCIN (parameter 228236).
Total precipitation (parameter 228) will be removed from the analysis.
Technical content
Changes to GRIB encoding
The GRIB model identifiers (generating process identification number) for cycle 49r1 will be changed as follows:
GRIB 1 Section 1 Octets | GRIB 2 Section 4 Octets | ecCodes key | Component | Model identifier | |
---|---|---|---|---|---|
48r1 | 49r1 | ||||
6 | 14 | generatingProcessIdentifier | Atmospheric model | 154 | 158 |
6 | 14 | generatingProcessIdentifier | Ocean wave model | 119 | 106 |
For all parameters in GRIB 2 the Master Tables Version Number will be changed as follows:
GRIB 2 Section 1 Octets | ecCodes key | Master Tables Version Number | |
---|---|---|---|
48r1 | 49r1 | ||
10 | tablesVersion | 30 | 32 |
Software
To handle the data of Cycle 49r1 we recommend to use the ECMWF software packages
ecCodes 2.36.0 (minimum version 2.35.1)
CodesUI 1.8.0 (minimum version 1.7.3)
Magics 4.15.4 (minimum version 4.13.0)
Metview 5.22.1
ODC 1.5.2 (minimum version 1.4.6)
On the ATOS HPC these versions correspond to ecmwf-toolbox/2024.06.0.0.
Availability of 49r1 test data
Note | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
The Release Candidate Phase started on Currently the following products are being regularly produced (table is being updated. Watch this space!)
As usual, any test data provided may not be complete and should not be used commercially or in service provision until the cycle is operational. Test data is provided for technical testing, evaluation and planning purposes only. |
Test data in MARS
IFS Cycle 49r1 beta test data is available from MARS with E-suite experiment version (expver) 0079 (MARS keywords EXPVER=0079, CLASS=OD):
Medium range forecast
Atmospheric model
- Control forecast (former HRES) (stream = OPER)
- ENS (stream = ENFO)
- ENS hindcast (stream = ENFH)
- ENS hindcast statistics (stream=EFHS)
Wave model
Sub-seasonal range forecast
Atmospheric model
- ENS sub-seasonal (former 'extended') (stream = EEFO)
- ENS Sub-seasonal (former 'extended') hindcasts (stream = EEFH)
- ENS Sub-seasonal (former 'extended') hindcast statistics (stream = EEHS)
Wave model
- ENS_WAM Sub-seasonal (former 'extended') (stream = WEEF)
- ENS-WAM Sub-seasonal (former 'extended') hindcasts (stream = WEEH)
Only users registered with access to MARS will be able to access these test data sets.The data should not be used for operational forecasting. Please report any problems you find with this data via the ECMWF Support Portal.
Test data in dissemination
Cycle 49r1 test data from the release candidate phase (RCP) are available through the test dissemination system, starting from the 00Z run on . Users with access to ECPDS and the Products Requirements Editor (PREd) can login to the test system at https://xdiss-monitor.ecmwf.int/ and trigger the transmission of test products in the usual manner. To receive the test products, users have to have their firewall open to the relevant ECPDS Data Movers:
INTERNET:
- 136.156.192.0/26
- 136.156.193.0/26
RMDCN:
- 136.156.196.0/26
- 136.156.197.0/26
The IFS Cycle 49r1 test products are available as version number 79 (file names ending with '79') and are intended to be generated shortly behind real-time.
If you wish to receive 49r1 test data automatically (regularly), please contact Data Services via the Support Portal .
Users are strongly advised to check that their software applications and data processing chain can handle the test data.
Please note that in particular changes to the resolution, e.g. requesting ENS-WAM data with 0.1° resolution, will have a significant impact on the requested data volumes.
The new parameters of Cycle 49r1 listed above will become available in dissemination after the implementation date.
If you don't have access to the ECPDS system or (T)PREd or should require any assistance with IFS Cycle 48r1 test dissemination products, please contact us via the Support Portal .
Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
|
Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
titleColor | #ffffff |
---|---|
titleBGColor | #00A4C4 |
title | All IFS cycles |
Webinars
Introduction to Cycle 49r1 | Verification, products and technical aspects | Data access and format, testing and practicalities | ||||
---|---|---|---|---|---|---|
|
| Register for the data webinar on this page. |